HYDRA Autonomous Station

Fit-out

Everything on a single skid

Here is the new autonomous dust suppression station to have everything you need on your site in one move, a dust suppression cannon with water and electricity on a single skid that can be lifted by forklift or with hooks.

Enhanced because it is equipped with a telescopic tower with extension up to 5 metres to tackle the dust at closer range and more easily reach the point where it is generated.

The range of the jet is over 40 metres and the fan motor is fitted with a potentiometer to adjust the length of the misting jet, a very useful function to avoid interference on the construction site and overspray beyond its boundaries.

The water consumption is very low and allows non-stop operation for hours, thanks to the high-pressure pump that enables sustainable use of the water reserve.

The cannon also has an IP67 LED spotlight to illuminate the jet in poor lighting conditions or demolition work at night.

• Dust Suppression Cannon: Phoenix Power
• Generator set: Choice of petrol or diesel
• Handling: Forkliftable
• Automation: Electric rotation, tower extension and tilt

Components

• +Dust Suppression CannonPhoenix PowerRange 10-40 m with the telescopic mast raised, 4 nozzles, pressure 50 - 60 bar - integrated high-pressure pump.
• +Tower extension5 m poleTelescopic tower with electric extension.
• +Automatic rotation0°-300°Set from the control panel in a few steps.
• +Tilt+45°The cannon can be tilted vertically from the control panel.
• +Generator Set10 kVAChoice of petrol or diesel – 10 kVA output.
• +Water tank1,000 litres1,000 litres - polyethylene. No inlet water pressure required.
• +HandlingForkliftableMounted on a single base that can be lifted by forklift or with hooks. 231x161xh238/500 cm – 1,050 kg.