Conrad C32
The CONRAD C32 dust suppression cannon is certainly the most popular product because it combines two key features: versatility and power.
Details- Home
- Dust Suppression Cannons
- Automatic
- Conrad C42
Conrad C42
The best solution for dust and odour suppression at landfills and waste recycling sites, minimising water consumption
More than 40 m of jet powered by a high-quality high-pressure pump.
40mRange
4.700m²Area covered
340°Automatic rotation
18-21l/minWater consumption
8kWInstalled power
40mrange
Details
Built for the site
Mounting on a three-wheel trolley
The CONRAD C42 mobile dust suppression cannon, mounted on a TROLLEY to enable dust suppression at temporary construction sites or in work areas where the source of dust may vary over time.
The Conrad C42 cannon has a range of 40 metres, and the trolley set-up makes it the ideal product to rent for medium to long periods.
Mounting on Articulated Arm
The CONRAD C42 dust suppression cannon is undoubtedly the flagship of our range, as its pantograph arm allows the cannon to reach precise points for effective dust suppression.
Perfect in any situation, but certainly suitable for: landfills and remediation.
Mounting on a fixed pole
The CONRAD C42 dust suppression cannon is suitable for construction sites and permanent work sites where dust is generated in specific areas, such as during the loading and unloading of aggregates.
The tower-mounted model is equipped with forklift pockets, so it is easily transportable if the dust source moves.
Equipment
Automations and options
Automation
- Heated aluminium nozzle ring with an electric heating element for sub-zero operation.
- Integrated PLC panel with touchscreen panel
- rotation control 0° to 340°;
- working angle from -20° to + 45°;
- selectable active nozzles;
- articulated arm with up/down movement;
- Weekly work scheduling (3 daily start/stop cycles)
- Automatic water drainage (function can be disabled)
- Type of misting
- high-pressure fine misting (for wood dust or similar)
- coarser misting (perfect for demolition)
Cannoni Conrad and water
- The CONRAD filtration system for incoming water is the best on the market and uses astainless steel filter cartridge, length 500 mm x 80 mm diameter. Inspectable triple-mesh stainless steel filter.
This means the cannon can be supplied with any type of water: industrial water, well water, water from the fire brigade’s ring main, water from a treatment plant, mains water, rainwater...
All CONRAD cannons are fitted with a vertical pump for gravity-fed operation, so no inlet water pressure is required.
Optional extras
- Odour suppression: electric dosing pump for mixing the odour control chemical (chemical not included)
- ON-OFF radio remote control with 12 function keys, battery charger. Range 100 m.
- Integrated anemometer with PLC.
- Customised turbine colour.
- Atex components on request according to the level required.
Optional extras
Optional extras available
Radio remote control
This model can be fitted with a radio remote control to operate the automatic functions from a distance, for example to direct the mist jet precisely straight from the excavator cab. The radio remote controls selected by the Cannoni Conrad team are high quality and suited to industrial environments.
Technical specifications
Data sheet
40 mRange
4,700 m²Area covered
340°Automatic rotation
18-21 l/minWater consumption
Documents
Technical data sheetPDF · 146.4 KBDownload| Range | 40 m |
|---|---|
| No. of nozzles | 64 - selectable 32|32 |
| Nozzle rings | 2 aluminium nozzle rings - heated by an electric heating element for sub-zero operation. |
| PLC automation | integrated PLC electronics, Headlight switch-on, Water pump switch-on, Nozzle ring heating switch-on, Fan switch-on, Pause/Work function, Rotation setting from 0° to 340°, Articulated arm up/down, Daily and weekly timer, selectable active nozzles |
| Rotation | 340° automatic with servo motor |
| Tilt | -20° +45° automatic |
| Fan power | 3 kW-400V-50Hz |
| Total installed power | 8 kW |
| Raise / Lower | only with the articulated arm configuration - reachable working height 5.5 m |
| Ø FAN | 410 mm - 3200 rpm |
| Pressure | 50 - 60 bar - integrated high-pressure pump |
| Water Consumption | 18-21 l/min |
| IP | 65 |
| Area covered | 4700 m² |
| Noise | 70 dB |
| Water Filter | Inspectable stainless steel filter |
| Filtering capacity | 250 µM 60 mesh, 100 µm |
| Water connection | 1 ½ " - Camlock |
| Water pump included | Vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required |
| Electrical connection | CEE 32A 3P+N+E |
| Optional extras available | Industry 4.0 kit, Pressure washer lance kit with 10 m of connected high-pressure hoses, Dosing pump for odour abatement, Radio remote control |
Other models
From the same range
Conrad C50
The Conrad C50 is a dust suppression cannon with a range of 50 metres, designed to solve the problem of dust production on construction sites, quarries, steelworks and cement works.Equipped with a metering pump, it is a valuable ally for odour reduction in landfills, anaerobic digestion sites, compost storage sites and the waste sector in general.
Details
Conrad C62
The Conrad C62 dust suppression cannon can control dust and odours in any kind of hostile environment without any difficulty.The Conrad C62 dust suppressor lets you select the number of active nozzles, depending on the misting intensity you want to achieve.
Details
Conrad C72
A high-powered dust suppression cannon, fitted with a 15 kW motor for a range of over 70 metres: these are the performance figures of the Conrad C72.Full automation, slewing, vertical tilt, timer, heated ring and much more.
DetailsFrom the site
Articles about this model
Conrad C42The context: an industrial environment with · 15 May 2026
Conrad C42 and Phoenix at height against scrap and galvanising dust
Read
Conrad C42In the province of Rome we installed · 8 November 2022
Conrad C42 Bikini ceiling-mounted in the province of Rome
Read
Conrad C42Conrad C42 dust suppression cannon used during · 15 December 2020
Conrad C42 at a recycling site in Novate Milanese
Read
Conrad C42The Conrad C42 is mounted on · 15 December 2020
Conrad C42 in a ceramics plant in Modena
Read
Conrad C42The Conrad C42, on an articulated arm · 15 December 2020
Conrad C42 in a tunnel in Lausanne, Switzerland
Read
Conrad C42Cannoni-Conrad was called in to suppress · 10 October 2019
Conrad C42 against dust in the Lausanne railway tunnel
ReadQuote
Request a quote
Use this form to request information about a dust suppression cannon or a quote straight away for the dust you need to suppress on site. We’ll contact you as soon as possible.