Home
Autonomous Stations
Autonomous Station #21

Autonomous Station #21

Name: Stazione Autonoma #21
Brand: Conrad

Request a quote Download the catalogue

10.700m²Area covered

60mRange

10.000lTank

60l/minWater consumption

Fit-out

Everything on a single skid

This Autonomous Station on a hook-lift body is the largest in its class: 8000-litre steel tank, diesel generator and C62 dust suppression cannon on an articulated arm.

A customised set-up specifically requested by the company to handle dust from quarrying.

Dust Suppression Cannon: C62
Generator set: Integrated
Handling: Hook-lift
Automation: Integrated PLC

Cannon Features Download the catalogue

Components

10.700m²area covered

Details

Built for the site

AREAS OF USE

We carry out these projects on hook-lift trucks very frequently. The sectors in greatest demand are certainly demolition, waste management and soil remediation.

In these sectors, being self-sufficient in water and electricity is essential to reduce wasted time and resources.

The hook-lift body

The hook-lift body is made to measure for the lorry it is to be loaded onto.

The hook-lift body will be fitted with the dust suppression cannon, the generator and the steel tank, which can be transported fully loaded.

PLC

Rotation control from 0° to 340°
Tilt control from -20° to + 45°.
Up/down movement in the articulated arm model
Setting the working angle Start
Fan Start water supply (motor pump/ solenoid valves)
Weekly work scheduling (3 daily start/stop cycles)
Active nozzle selection
Switching the nozzle ring heating on or off
Turning the light on or off
Turning the radio remote control on or off

In action

Autonomous Station in Action

Technical specifications

Summary sheet

10.700 m²Area covered

60 mRange

60 l/minWater consumption

Documents

Technical data sheetPDF · 199.3 KBDownload

Dust Suppression Cannon	C62
Tank capacity	10.000L
Generator Set	Integrated
Handling	Hook-lift
Automation	Integrated PLC
Range	60 m
No. of nozzles	60 - selectable in groups of 20\|20\|20
Nozzle rings	1 aluminium nozzle ring - heated by an electric heating element for sub-zero operation.
PLC automation	integrated PLC electronics, Headlight switch-on, Water pump switch-on, Nozzle ring heating switch-on, Fan switch-on, Pause/Work function, Rotation setting from 0° to 340°, Articulated arm up/down, Daily and weekly timer, selectable active nozzles
Rotation	340° automatic with servo motor
Tilt	-20° +45° automatic
Raise / Lower	only with the articulated arm configuration - reachable working height 5.5 m
Water Consumption	60 l/min
Fan power	11 kW - 400V - 50Hz
Ø FAN	660 mm
Total installed power	15 kW
IP	65
Pressure	10-15 bar, 50-60 bar
Area covered	10.700 m²
Noise	70 dB
Water Filter	Inspectable stainless steel filter
Filtering capacity	100 µm
Water connection	1 ½ " - Camlock
Water pump included	Vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required
Lifting	Forklift fork pockets
Optional extras available	Industry 4.0 kit, Dosing pump for odour abatement, Radio remote control
Electrical connection	CEE 32A 3P+N+E