1. Home
  2. Dust Suppression Cannons
  3. Automatics
  4. Conrad C72

Conrad C72

A high-powered sprayer, equipped with a 15 kW motor for a range of more than 70 metres, these are the performance features of the Conrad C72.

Full automation, pivoting, vertical tilt, timer, heated crown and more.

70mRange
14.700m²Covered area
340°Rotazione automatica
60l/minConsumo acqua
20kWPotenza installata

Componenti

Com'è fatto

Conrad C72
70mgittata

Versioni

Set-ups

Cannoni Conrad, C32 on a carriage

Set up on a three-wheel trolley

Cannoni Conrad, C32 on an articulated arm

Outfitting on Articulated Arm

Cannoni Conrad, C32 on an articulated arm

Setting up on a fixed pole

Dotazione

Automations and options

Automations

  • Heated aluminium sprocket with electrical resistance for sub-zero operation.
  • Integrated PLC panel with touchscreen panel
    • rotation control 0° to 340°;
    • working angle from -20° to + 45°;
    • selectable active nozzles;
    • articulated arm with up/down movement;
    • Weekly work scheduling (3 daily start/stop cycles)
  • Automatic water drainage (excludable function)
  • Type of atomisation
    • high-pressure fine atomisation (for wood dust or similar)
    • thicker spray (perfect for demolition)

Cannoni Conrad’s ‘L’acqua’

  • The CONRAD filtration system for incoming water is the best on the market and uses aStainless steel filter cartridge, length 500 mm x 80 mm diameter. Inspectable triple-mesh stainless steel filter.
    This means the cannon can be supplied with any type of water: industrial water, well water, water from the fire brigade’s ring main, water from a treatment plant, mains water, rainwater...
    All CONRAD cannons are fitted with a vertical self-priming pump for gravity-fed operation, so no inlet water pressure is required.

Optional

  • Odour suppression: electric dosing pump for mixing the odour control chemical (chemical not included)
  • ON-OFF radio remote control with 12 function keys, battery charger. Range 100 m.
  • Integrated anemometer with PLC.
  • Customised turbine colour.
  • Atex components on request according to the level required.

Technical specifications

Technical specifications

70 mRange
14,700 m²Covered area
340°Rotazione automatica
60 l/minConsumo acqua

Documents

Technical data sheetPDF · 227.3 KBScarica
Range70 m
N. Nozzles60 - selectable in groups of 20|20
Crowns1 aluminium crown - heated with electrical resistance for sub-zero operation.
PLC automationintegrated PLC electronics, Headlight switch-on, Water pump switch-on, Crown heater switch-on, Fan switch-on, Pause/Work function, Rotation setting from 0° to 340°, Articulated boom up/down, Daily and weekly timer, selectable active nozzles
Rotation340° automatic with servo motor
Inclination-20° +45° automatic
Ascent / Descentonly with articulated boom set-up - reachable working height 5.5 m
Pressure10-15 bar, 50-60 bar
Water Consumption60 l/min
Covered Area14700 m²
Fan power15 kW-400V-50Hz
Ø FAN660 mm
Total installed power20 kW
Electrical connectionCEE 63A
IP65
Noise70 dB
Water FilterInspectable stainless steel filter
Filtering capacity100 µm
Water connection1 ½ " - Camlock, ¾" male
Available optionsIndustry 4.0 kit, Dosing pump for odour abatement, Remote control

Altri modelli

Dalla stessa gamma

Quotation

Request a quote

Use this form to request information about a dust suppression cannon or to get a quote straight away for the dust you need to control on your building site. We’ll be in touch as soon as possible!

Anyone on site, please call 0376 391294 331 8455835

Leave at least one contact: email or phone.

Request a quote

We’ll get back to you within one working day.

Leave at least one contact: email or phone.