1. Home
  2. Dust Suppression Cannons
  3. Automatics
  4. Conrad C42

Conrad C42

The best solution for dust and odour suppression at landfills and waste recycling sites, minimising water consumption

More than 40 m of jet powered by a high-quality high-pressure pump.

 

40mRange
4.700m²Covered area
340°Rotazione automatica
18-21l/minConsumo acqua
8kWPotenza installata

Componenti

Com'è fatto

Conrad C42
40mgittata

Details

Fatto per il cantiere

Cannoni Conrad, C32 on a carriage

Set up on a three-wheel trolley

The CONRAD C42 mobile dust suppression cannon, mounted on a TROLLEY to enable dust suppression at temporary construction sites or in work areas where the source of dust may vary over time.

The Conrad C42 cannon has a range of 40 metres, and the trolley set-up makes it the ideal product to rent for medium to long periods.

Cannoni Conrad, C32 on an articulated arm

Outfitting on Articulated Arm

The CONRAD C42 dust suppression cannon is undoubtedly the flagship product in our range, as its pantograph arm enables the dust suppression system to target specific areas for effective dust suppression.

Perfect in any situation, but certainly suitable for: landfills and reclamation.

Cannoni Conrad, C32 on an articulated arm

Setting up on a fixed pole

The CONRAD C42 dust suppression cannon is suitable for construction sites and permanent work sites where dust is generated in specific areas, such as during the loading and unloading of aggregates.
The tower-mounted model is equipped with compartments for lifting with a forklift, so it is easily transportable if the powder production position is changed.

Dotazione

Automations and options

Automations

  • Heated aluminium sprocket with electrical resistance for sub-zero operation.
  • Integrated PLC panel with touchscreen panel
    • rotation control 0° to 340°;
    • working angle from -20° to + 45°;
    • selectable active nozzles;
    • articulated arm with up/down movement;
    • Weekly work scheduling (3 daily start/stop cycles)
  • Automatic water drainage (excludable function)
  • Type of atomisation
    • high-pressure fine atomisation (for wood dust or similar)
    • thicker spray (perfect for demolition)

Cannoni Conrad’s ‘L’acqua’

  • The CONRAD filtration system for incoming water is the best on the market and uses aStainless steel filter cartridge, length 500 mm x 80 mm diameter. Inspectable triple-mesh stainless steel filter.
    This means the cannon can be supplied with any type of water: industrial water, well water, water from the fire brigade’s ring main, water from a treatment plant, mains water, rainwater...
    All CONRAD cannons are fitted with a vertical self-priming pump for gravity-fed operation, so no inlet water pressure is required.

Optional

  • Odour suppression: electric dosing pump for mixing the odour control chemical (chemical not included)
  • ON-OFF radio remote control with 12 function keys, battery charger. Range 100 m.
  • Integrated anemometer with PLC.
  • Customised turbine colour.
  • Atex components on request according to the level required.

Technical specifications

Technical specifications

40 mRange
4,700 m²Covered area
340°Rotazione automatica
18-21 l/minConsumo acqua

Documents

Technical data sheetPDF · 146.2 KBScarica
Range40 m
N. Nozzles64 - selectable 32|32
Crowns2 aluminium crowns - heated with electrical resistance for sub-zero operation.
PLC automationintegrated PLC electronics, Headlight switch-on, Water pump switch-on, Crown heater switch-on, Fan switch-on, Pause/Work function, Rotation setting from 0° to 340°, Articulated boom up/down, Daily and weekly timer, selectable active nozzles
Rotation340° automatic with servo motor
Inclination-20° +45° automatic
Fan power3 Kw-400V-50Hz
Total installed power8 kW
Ascent / Descentonly with articulated boom set-up - reachable working height 5.5 m
Ø FAN410 mm - 3200 rpm
Pressure50 - 60 bar - integrated high-pressure pump
Water Consumption18-21 l/min
IP65
Covered Area4700 m²
Noise70 dB
Water FilterInspectable stainless steel filter
Filtering capacity250 µM 60 mesh, 100 µm
Water connection1 ½ " - Camlock
Water pump includedSelf-priming vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required
Electrical connectionCEE 32A 3P+N+E
Available optionsIndustry 4.0 kit, Pressure washer lance kit with 10 m of connected high pressure hoses, Dosing pump for odour abatement, Remote control

Altri modelli

Dalla stessa gamma

Quotation

Request a quote

Use this form to request information about a dust suppression cannon or to get a quote straight away for the dust you need to control on your building site. We’ll be in touch as soon as possible!

Anyone on site, please call 0376 391294 331 8455835

Leave at least one contact: email or phone.

Request a quote

We’ll get back to you within one working day.

Leave at least one contact: email or phone.