Conrad C42
The best solution for controlling dust and odours at landfill sites and waste recycling facilities, whilst minimising water consumptionA spray range of over 40 metres, powered by a high-quality high-pressure pump.
Details- Home
- Dust Suppression Cannons
- Automatics
- Conrad C32
Conrad C32
The CONRAD C32 nebuliser is certainly the most popular product because it combines two key features: versatility and power.
30+mRange
2.800m²Covered area
340°Rotazione automatica
33l/minConsumo acqua
8kWPotenza installata
30+mgittata
In azione
Conrad C32 in Action
Dotazione
Automations and options
Automations
- Heated aluminium sprocket with electrical resistance for sub-zero operation.
- Integrated PLC panel with touchscreen panel
- rotation control 0° to 340°;
- working angle from -20° to + 45°;
- selectable active nozzles;
- articulated arm with up/down movement;
- Weekly work scheduling (3 daily start/stop cycles)
- Automatic water drainage (excludable function)
- Type of atomisation
- high-pressure fine atomisation (for wood dust or similar)
- thicker spray (perfect for demolition)
Cannoni Conrad’s ‘L’acqua’
- The CONRAD filtration system for incoming water is the best on the market and uses aStainless steel filter cartridge, length 500 mm x 80 mm diameter. Inspectable triple-mesh stainless steel filter.
This means the cannon can be supplied with any type of water: industrial water, well water, water from the fire brigade’s ring main, water from a treatment plant, mains water, rainwater...
All CONRAD cannons are fitted with a vertical self-priming pump for gravity-fed operation, so no inlet water pressure is required.
Optional
- Odour suppression: electric dosing pump for mixing the odour control chemical (chemical not included)
- ON-OFF radio remote control with 12 function keys, battery charger. Range 100 m.
- Integrated anemometer with PLC.
- Customised turbine colour.
- Atex components on request according to the level required.
Versioni
Set-ups
Set up on a three-wheel trolley
The CONRAD C32 mobile dust suppression cannon, mounted on a TROLLEY to enable dust suppression at temporary construction sites or in work areas where the source of the dust may vary over time.
The Conrad C32 cannon has a range of 30 metres and the trolley set-up makes it the ideal product to rent for medium to long periods.
- Dimensions: 192 x 210 x 273 cm
- Weight: kg. 400
Outfitting on Articulated Arm
The CONRAD C32 dust suppression cannon is undoubtedly the flagship product in our range, as its pantograph arm enables the dust suppression system to target specific areas for effective dust suppression.
Perfect in any situation, but certainly suitable for: landfills and reclamation.
- Dimensions: 192 x 210 x 273 cm
- Weight: kg. 400
Setting up on a fixed pole
The CONRAD C32 dust suppression cannon is suitable for construction sites and permanent work sites where dust is generated in specific areas, such as during the loading and unloading of aggregates.
The tower-mounted model is equipped with compartments for lifting with a forklift, so it is easily transportable if the powder production position is changed.
Dimensions: 80 x 100 x 230
Weight: kg. 210
Details
Fatto per il cantiere
Technical specifications
Technical specifications
30+ mRange
2,800 m²Covered area
340°Rotazione automatica
33 l/minConsumo acqua
Documents
Technical data sheetPDF · 168.0 KBScarica| Range | over 30 m |
|---|---|
| N. Nozzles | 64 - selectable 32|32 |
| Crowns | 2 aluminium crowns - heated with electrical resistance for sub-zero operation. |
| PLC automation | integrated PLC electronics, Headlight switch-on, Water pump switch-on, Crown heater switch-on, Fan switch-on, Pause/Work function, Rotation setting from 0° to 340°, Articulated boom up/down, Daily and weekly timer, selectable active nozzles |
| Rotation | 340° automatic with servo motor |
| Inclination | -20° +45° automatic |
| Fan power | 3 Kw-400V-50Hz |
| Total installed power | 8 kW |
| Ascent / Descent | only with articulated boom set-up - reachable working height 5.5 m |
| Ø FAN | 410 mm - 3000 rpm |
| Pressure | 10-15 bar |
| Water Consumption | 33 l/min |
| IP | 65 |
| Covered Area | 2800 m² |
| Noise | 70 dB |
| Water Filter | Inspectable stainless steel filter |
| Filtering capacity | 100 µm |
| Water connection | 1 ½ " - Camlock |
| Water pump included | Self-priming vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required |
| Electrical connection | CEE 32A 3P+N+E |
| Available options | Industry 4.0 kit, Dosing pump for odour abatement, Remote control |
Altri modelli
Dalla stessa gamma
Conrad C50
The Conrad C50 is a dust suppression cannon with a range of 50 metres, designed to solve the problem of dust production on construction sites, quarries, steelworks and cement factories.Equipped with a metering pump, it is a valuable ally for odour reduction in landfills, anaerobic digestion sites, compost heaps and the waste sector in general.
Details
Conrad C62
The Conrad C62 dust suppression cannon is capable of suppressing dust and odours in any type of hostile environment with ease.The Conrad C62 dust suppressor allows you to select the number of active nozzles, depending on the desired spray intensity.
Details
Conrad C72
A high-powered sprayer, equipped with a 15 kW motor for a range of more than 70 metres, these are the performance features of the Conrad C72.Full automation, pivoting, vertical tilt, timer, heated crown and much more.
DetailsFrom the building site
Articles about this model
Conrad C32Le attività di demolizione, bonifica e · 26 August 2026
The C32 Dust Suppression Cannon: supporting clean-up operations at railway construction sites
Read
Conrad C32Fine particulate matter during demolition work · 2 April 2024
Demolition whilst controlling dust
Read
Conrad C32Standalone system on a roll-off trailer supplied by · 17 December 2021
Self-contained, detachable dust suppression system: Impresa Bogoni Scavi
Read
Conrad C32https://youtu.be/HD0LgSxgabc Demolire è una professione e · 27 January 2021
CONRAD C32 reduces dust during demolition work
Read
Conrad C32A Conrad C32 dust suppression cannon mounted · 22 December 2020
CONRAD C32 tackles dust at a demolition site in Villorba
Read
Conrad C32Sistema di abbattimento polvere CONRAD C32 · 16 December 2020
Conrad C32 for Environmental Remediation – Savona
ReadQuotation
Request a quote
Use this form to request information about a dust suppression cannon or to get a quote straight away for the dust you need to control on your building site. We’ll be in touch as soon as possible!