CONRAD C42 ceiling-mounted cannon
In the province of Rome, we installed the Conrad C42 cannon bikini version, i.e. divided into two pieces: TOP: the cannon installed at altitude with the
The best solution for dust and odour suppression at landfills and waste recycling sites, minimising water consumption
More than 40 m of jet powered by a high-quality high-pressure pump.
| Range | 40 m |
|---|---|
| N. Nozzles | 64 - selectable 32|32 |
| Crowns | 2 aluminium crowns - heated with electrical resistance for sub-zero operation. |
| PLC automation | integrated PLC electronics, Headlight switch-on, Water pump switch-on, Crown heater switch-on, Fan switch-on, Pause/Work function, Rotation setting from 0° to 340°, Articulated boom up/down, Daily and weekly timer, selectable active nozzles |
| Rotation | 340° automatic with servo motor |
| Inclination | -20° +45° automatic |
| Fan power | 3 Kw-400V-50Hz |
| Total installed power | 8 kW |
| Ascent / Descent | only with articulated boom set-up - reachable working height 5.5 m |
| Ø FAN | 410 mm - 3200 rpm |
| Pressure | 50 - 60 bar - integrated high-pressure pump |
| Water Consumption | 18-21 l/min |
| IP | 65 |
| Covered Area | 4700 m² |
| Noise | 70 dB |
| Water Filter | Inspectable stainless steel filter |
| Filtering capacity | 250 µM 60 mesh, 100 µm |
| Water connection | 1 ½ " - Camlock |
| Water pump included | Self-priming vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required |
| Electrical connection | CEE 32A 3P+N+E |
| Available options | Industry 4.0 kit, Pressure washer lance kit with 10 m of connected high pressure hoses, Dosing pump for odour abatement, Remote control |
The CONRAD filtration system for incoming water is the best on the market and uses a Stainless steel filter cartridge, length 500 mm x 80 mm diameter. Inspectable triple-mesh stainless steel filter.
This allows you to use any type of water to feed the cannon: industrial, well, VVF ring, purifier, aqueduct, rain collection...
All CONRAD cannons are equipped with a vertical and self-priming pump for gravity feeding, therefore no inlet water pressure is required.
In the province of Rome, we installed the Conrad C42 cannon bikini version, i.e. divided into two pieces: TOP: the cannon installed at altitude with the
Conrad C42 Nebulizer Cannon used during the waste treatment process in Novate Milanese - Milan - Italy
CONRAD C42 fixed on a 12 m high wall to reduce dust in a loading area of a ceramic factory in Modena
CONRAD C42 on an articulated boom equipped with a 3-wheel trailer in action to reduce dust during tunnel excavation - Lausanne
Our line of spray cannons is designed to cover all needs at the most difficult sites:
QUARRIES - MINES - CONSTRUCTION SITES - DEMOLITION - AGGREGATES FROM CEMENT AND STEEL WORKS - RECYCLING - WASTE DUMPS - ODOUR ELIMINATION IN LANDFILLS - WOOD AND ALUMINIUM PROCESSING SITES - ENVIRONMENTAL REPAIRS - COOLING OF STADIUMS AND PARKS.
