Autonomous Station #05

Name: Stazione Autonoma #05
Brand: Conrad

2.800m²Area covered

30+mRange

5000lTank

33l/minWater consumption

Fit-out

Everything on a single skid

Autonomous demolition station with 5,000 L tank, generator set and telescopic mast. Complete with radio remote control.

Components

2.800m²area covered

The cannon

Heated aluminium nozzle ring with an electric heating element for sub-zero operation.
Integrated PLC panel with touchscreen panel
- rotation control 0° to 340°;
- working angle from -20° to + 45°;
- selectable active nozzles;
- articulated arm with up/down movement;
- Weekly work scheduling (3 daily start/stop cycles)
Automatic water drainage (function can be disabled)
Type of misting
- high-pressure fine misting (for wood dust or similar)
- coarser misting (perfect for demolition)

The CONRAD filtration system for incoming water is the best on the market and uses astainless steel filter cartridge, length 500 mm x 80 mm diameter. Inspectable triple-mesh stainless steel filter.
This means the cannon can be supplied with any type of water: industrial water, well water, water from the fire brigade’s ring main, water from a treatment plant, mains water, rainwater...
All CONRAD cannons are fitted with a vertical pump for gravity-fed operation, so no inlet water pressure is required.

Odour suppression: electric dosing pump for mixing the odour control chemical (chemical not included)
ON-OFF radio remote control with 12 function keys, battery charger. Range 100 m.
Integrated anemometer with PLC.
Customised turbine colour.
Atex components on request according to the level required.

In action

Technical specifications

2,800 m²Area covered

30+ mRange

33 l/minWater consumption

Documents

Dust Suppression Cannon	C32
Tank capacity	5000L
Generator Set	Yes
Handling	Hook-lift
Automation	Integrated PLC
Range	over 30 m
No. of nozzles	64 - selectable 32\|32
Nozzle rings	2 aluminium nozzle rings - heated by an electric heating element for sub-zero operation.
PLC automation	integrated PLC electronics, Headlight switch-on, Water pump switch-on, Nozzle ring heating switch-on, Fan switch-on, Pause/Work function, Rotation setting from 0° to 340°, Articulated arm up/down, Daily and weekly timer, selectable active nozzles
Rotation	340° automatic with servo motor
Tilt	-20° +45° automatic
Fan power	3 kW-400V-50Hz
Total installed power	8 kW
Raise / Lower	only with the articulated arm configuration - reachable working height 5.5 m
Ø FAN	410 mm - 3000 rpm
Pressure	10-15 bar
Water Consumption	33 l/min
IP	65
Area covered	2800 m²
Noise	70 dB
Water Filter	Inspectable stainless steel filter
Filtering capacity	100 µm
Water connection	1 ½ " - Camlock
Water pump included	Vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required
Electrical connection	CEE 32A 3P+N+E
Optional extras available	Industry 4.0 kit, Dosing pump for odour abatement, Radio remote control