#05 Stand-alone Station

Name: Stazione Autonoma #05
Brand: Conrad

2.800m²Covered area

30+mRange

5000lTank

33l/minConsumo acqua

Set up

Tutto su un unico skid

Autonomous demolition station with 5000L tank, generator and telescopic pole. Complete with radio control.

Componenti

2.800m²area coperta

The cannon

Heated aluminium sprocket with electrical resistance for sub-zero operation.
Integrated PLC panel with touchscreen panel
- rotation control 0° to 340°;
- working angle from -20° to + 45°;
- selectable active nozzles;
- articulated arm with up/down movement;
- Weekly work scheduling (3 daily start/stop cycles)
Automatic water drainage (excludable function)
Type of atomisation
- high-pressure fine atomisation (for wood dust or similar)
- thicker spray (perfect for demolition)

The CONRAD filtration system for incoming water is the best on the market and uses aStainless steel filter cartridge, length 500 mm x 80 mm diameter. Inspectable triple-mesh stainless steel filter.
This means the cannon can be supplied with any type of water: industrial water, well water, water from the fire brigade’s ring main, water from a treatment plant, mains water, rainwater...
All CONRAD cannons are fitted with a vertical self-priming pump for gravity-fed operation, so no inlet water pressure is required.

Odour suppression: electric dosing pump for mixing the odour control chemical (chemical not included)
ON-OFF radio remote control with 12 function keys, battery charger. Range 100 m.
Integrated anemometer with PLC.
Customised turbine colour.
Atex components on request according to the level required.

In azione

Technical specifications

2,800 m²Covered area

30+ mRange

33 l/minConsumo acqua

Documents

Dust Suppression Cannon	C32
Tank capacity	5000L
Generator Set	Yes
Handling	Scarrabile
Automation	Integrated PLC
Range	over 30 m
N. Nozzles	64 - selectable 32\|32
Crowns	2 aluminium crowns - heated with electrical resistance for sub-zero operation.
PLC automation	integrated PLC electronics, Headlight switch-on, Water pump switch-on, Crown heater switch-on, Fan switch-on, Pause/Work function, Rotation setting from 0° to 340°, Articulated boom up/down, Daily and weekly timer, selectable active nozzles
Rotation	340° automatic with servo motor
Inclination	-20° +45° automatic
Fan power	3 Kw-400V-50Hz
Total installed power	8 kW
Ascent / Descent	only with articulated boom set-up - reachable working height 5.5 m
Ø FAN	410 mm - 3000 rpm
Pressure	10-15 bar
Water Consumption	33 l/min
IP	65
Covered Area	2800 m²
Noise	70 dB
Water Filter	Inspectable stainless steel filter
Filtering capacity	100 µm
Water connection	1 ½ " - Camlock
Water pump included	Self-priming vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required
Electrical connection	CEE 32A 3P+N+E
Available options	Industry 4.0 kit, Dosing pump for odour abatement, Remote control