misting system on Doppstadt DW-3060 shredder
We intervened to apply a customised spraying system on a Doppstadt DW-3060 F-type shredder. This machine is used to shred wood, specifically: furniture, boxes, chairs, logs, branches, pallets, boards, etc.
This machinery is used in various contexts, outdoors such as at landfills and construction sites, but also inside warehouses where goods to be shredded are stored.
This Doppstadt DW-3060 wood shredder has been modified by raising the hopper in order to contain the waste without dispersing it during loading by the polyp arm excavator.
A lot of dust is generated during shredding inside the hopper, as well as during unloading from the conveyor belt until it falls onto the pile.
The customer contacted us requesting a customised spraying system for this mobile machine.
our plant
A system of steel pipes and nozzles for high-pressure atomisation around the entire perimeter of the hopper to intercept the powder during the grinding operation.
The implant was fixed externally to protect the structure from the blows of the material being loaded, while the nozzles were inserted inside the holes drilled on the hopper... meticulous work to ensure a long life of the implant.
The outlet section of the shredder was also prone to dust production, so we installed two lines of spray nozzles capable of directing water on both sides onto the belt.
Falling material on the ground was another source of dust, so we placed two supports with nozzles positioned at different angles at the end of the belt to intercept and capture the rising dust.
The atomisation system is powered by a high-pressure pump that requires a three-phase power supply and water connection.
Everything travels together with the shredder, system and pump.
