Conrad C72

A high-powered sprayer, equipped with a 15 kW motor for a range of more than 70 metres, these are the performance features of the Conrad C72.

Full automation, pivoting, vertical tilt, timer, heated crown and more.

Set-ups

Set up on a three-wheel trolley

Outfitting on Articulated Arm

Setting up on a fixed pole

Automations and options

Automations

  • Heated aluminium sprocket with electrical resistance for sub-zero operation.
  • Integrated PLC panel with touchscreen panel
    • rotation control 0° to 340°;
    • working angle from -20° to + 45°;
    • selectable active nozzles;
    • articulated arm with up/down movement;
    • Weekly work scheduling (3 daily start/stop cycles)
  • Automatic water draining (excludable function)
  • Type of atomisation
    • high-pressure fine atomisation (for wood dust or similar)
    • thicker spray (perfect for demolition)

Conrad Cannons and Water

  • The CONRAD filtration system for incoming water is the best on the market and uses a Stainless steel filter cartridge, length 500 mm x 80 mm diameter. Inspectable triple-mesh stainless steel filter.

    This allows you to use any type of water to feed the cannon: industrial, well, VVF ring, purifier, aqueduct, rain collection...

    All CONRAD cannons are equipped with a vertical and self-priming pump for gravity feeding, therefore no inlet water pressure is required.

Optional

  • Odour suppression: electric dosing pump for mixing the odour control chemical (chemical not included)
  • ON-OFF radio remote control with 12 function keys, battery charger. Range 100 m.
  • Integrated anemometer with PLC.
  • Customised turbine colour.
  • Atex components on request according to the level required.

Summary Sheet

Additional information

Range

70 m

N. Nozzles

60 - selectable in groups of 20|20

Crowns

1 aluminium crown - heated with electrical resistance for sub-zero operation.

PLC automation

integrated PLC electronics, Headlight switch-on, Water pump switch-on, Crown heater switch-on, Fan switch-on, Pause/Work function, Rotation setting from 0° to 340°, Articulated boom up/down, Daily and weekly timer, selectable active nozzles

Rotation

340° automatic with servo motor

Inclination

-20° +45° automatic

Ascent / Descent

only with articulated boom set-up - reachable working height 5.5 m

Pressure

10-15 bar, 50-60 bar

Water Consumption

60 l/min

Covered Area

14700 m²

Fan power

15 kW-400V-50Hz

Ø FAN

660 mm

Total installed power

20 kW

Electrical connection

CEE 63A

IP

65

Noise

70 dB

Water Filter

Inspectable stainless steel filter

Filtering capacity

100 µm

Water connection

1 ½ " - Camlock, ¾" male

Available options

Industry 4.0 kit, Dosing pump for odour abatement, Remote control

Cannons in the same range

Request a quote