Conrad LC50R

The CONRAD LC50R is a 50 m spray gun ideal for abating dust during demolition activities, also appreciated as a support in aggregate recycling plants to control dust exiting conveyor belts and screens for separating inert materials.

The LC50R has a range of 50 m and a coverage of approximately 7,500 m², thanks to its PLC for automatic rotation control that is programmable up to 340°.

The truck equipped with 3 pneumatic wheels, 2 stabilisers and a drawbar makes the CONRAD LC50R very manoeuvrable even on the roughest terrain.

Download Brochure

Performance

Nebulizer cannon performance table

Additional information

Range

50 m

N. Nozzles

45

Rotation

340° automatic with integrated PLC

PLC automation

Water pump switch-on, Fan switch-on, Sleep/Work function, Rotation setting from 0° to 340°, Daily and weekly timer

Inclination

-20° +45°manual

Pressure

10-15 bar

Water Consumption

33 l/min

Fan power

5 kW - 400V - 50Hz

Total installed power

7.9 kW

Noise

70 dB

IP

55

Covered Area

7500 m²

Ø FAN

500 mm

Water Filter

Inspectable stainless steel filter

Filtering capacity

100 µm

Water pump included

Self-priming vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required

Water connection

1 ½ " - Camlock

Electrical connection

CEE 32A 3P+N+E

Lifting

Housing for forklift forks

Available options

Automatic vertical inclination by PLC, Industry 4.0 kit, Dosing pump for odour abatement, Remote control

PLC

The Conrad LC50R dust suppression gun is equipped with PLC touch screen electronics that are easy for any operator to use.

The use of the PLC is essential to precisely set the rotation from 0° to 340° of the cannon in order to make the most of the spray range and act more precisely on the areas to be treated.

And with CANNONI-CONRAD's INDUSTRIA 4.0 KIT, the dust suppression gun will receive 20% in the form of a tax credit.

bikini version

The bikini version has a cannon set-up divided into two: the cannon with fifth wheel installed at altitude and the control block with PLC and pump positioned on the ground.

articulated arm version

The articulated boom version of our spray cannons is versatile and popular in both the demolition and waste management sectors. The articulated boom allows a height of 5.5 metres, making it possible to reach and get close to the source of the dust. The articulated boom spray gun can in many cases be used to take advantage of a higher position with respect to dust generation and thus act more effectively and quickly on containment and reduction.

SEMIAUTOMATIC NEBULISER

  • 45 nozzles on one crown;
  • 50 m spraying range;
  • AUTOMATIC ROTATION adjustable from 0 to 340° with integrated PLC;
  • Equipment:
    • on galvanised tower with slewing ring;
    • mounted on a galvanised trolley with three pneumatic wheels, two stabilisers and a slow drawbar; 
    • bikini, with the cannon positioned at altitude and the control unit on the ground.

Advantages

  • set-ups designed to meet the needs and requirements of temporary sites and permanent sites;
  • great range: there is no doubt that you will reach the powder;
  • PLC touch screen panel: intuitive buttons for quick and easy operation;
  • robust materials: made for the construction site;
  • can be implemented with the 8-button radio control: work remotely on your own;
  • Subsidisable goods with Industry 4.o: tax credit of 20% worth of cannon (click here to read more).

Conrad Cannons and Water

  • The CONRAD filtration system for incoming water is the best on the market and uses a Stainless steel filter cartridge, length 500 mm x 80 mm diameter. Inspectable triple-mesh stainless steel filter.

    This allows you to use any type of water to feed the cannon: industrial, well, VVF ring, purifier, aqueduct, rain collection...

    All CONRAD cannons are equipped with a vertical and self-priming pump for gravity feeding, therefore no inlet water pressure is required.

LC50R Stories

A custom-made nebuliser? You can.

There are many reasons why customisation of your standard machine is required. Special applications, requirements for maximum versatility or the desire to have a

LC50R BIKINI version

overhead atomiser and ground control The bikini version of our dust suppression cannons is one of the most popular and popular. Bikini stands for

More from our range

Request a quote

Call us