Industry 4.0 and CANNON-CONRAD you can!
17 March 2021
Industry 4.0 is perhaps the second most used word after 'virus' between 2020 and 2021! It can be said that the Industry 4.0 Plan
Spray station built on a saddle to be loaded automatically by a truck equipped with a trailer hitch.
The dust-laying station is equipped to be completely autonomous with water and electricity.
Autonomous station complete with:
- ARTICULATED ARM
-PLC INTEGRATED
-STEEL TANK 5000 L. TAILOR-MADE
-DIESEL GENERATOR SET
-4.40-METRE CUSTOMISED SADDLE FOR TRUCKS WITH TRAILER HITCH
-12-KEY REMOTE CONTROL
-INDUSTRY 4.0 KIT
The saddle is tailor-made for the truck on which it is to be loaded. In this case, the design was based on a 4.40 metre long saddle because the truck to be fitted out was a two-axle .
The saddle was equipped with the C32 dust suppression cannon, a complete PLC to manage all automatisms, the diesel power generator and a steel tank with a capacity of 5000 litres made to measure to respect the dimensions of the saddle.
The PLC installed on this machine is the top of the range as it can manage all the machine's automatisms.
Switching the fan on and off
Activation of solenoid valves and selection of operating nozzles (32+32)
Activation of crown heater for sub-zero temperatures
Rotation setting from 0° to 340*.
Setting the vertical inclination of the cannon
Articulated arm movement
Work Break Timer
Weekly and daily scheduling with time slots
This abatement station is an excellent solution in the demolition field, suitable for use alongside excavators equipped with a demolition grapple. The articulated boom that rises to more than 7 metres (5.5 outreach + the height of the truck body) allows the gun to intercept the dust from above, bringing it to the ground more quickly.
| Technical Data | model CONRAD C32 |
|---|---|
| ELECTRICAL CONNECTION | CEE plug 32A 5P |
| TOTAL INSTALLED POWER | 8 Kw |
| GITTATA | over 30 m |
| N. UGELLI | 64 (32+32) |
| CROWNS | 2 aluminium crowns | heated with electrical resistance for sub-zero operation. |
| AUTOMATISMS | PLC Functions: ON/OFF Fan | ON/OFF Pump| Rotation: 340° automatic | Tilt: -20% +45% automatic | Lifting and lowering of articulated arm | max. height 5.5 m | Selectable active nozzles | Work cycle programming |
| ROTATION | 340° automatic with servo motor |
| INCLINATION | -20° +45° automatic |
| FAN POWER | 3 Kw - 400V - 50Hz |
| ASCENT/DESCENT | only with articulated boom set-up | achievable working height 5.5 m |
| Ø FAN | 410 mm - 3000 rpm |
| PRESSURE | 10 - 15 bar |
| WATER CONSUMPTION | 33 l/min |
| IP | 65 |
| COVERED AREA | 2800 m² |
| NOISE | 70 dB |
| INTEGRATED FILTER | 100 µm |
| WATER PUMP INCLUDED | Self-priming vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required. |
| WATER ALLOCATION | 1 1/2″ - CAMLOCK |
Industry 4.0 is perhaps the second most used word after 'virus' between 2020 and 2021! It can be said that the Industry 4.0 Plan
https://youtu.be/HD0LgSxgabc Demolition is a profession, and in Italy alone there are an estimated 7 million abandoned buildings potentially subject to demolition action. In the previous article
Our line of spray cannons is designed to cover all needs at the most difficult sites:
QUARRIES - MINES - CONSTRUCTION SITES - DEMOLITION - AGGREGATES FROM CEMENT AND STEEL WORKS - RECYCLING - WASTE DUMPS - ODOUR ELIMINATION IN LANDFILLS - WOOD AND ALUMINIUM PROCESSING SITES - ENVIRONMENTAL REPAIRS - COOLING OF STADIUMS AND PARKS.
