Conrad C50

The Conrad C50 is a spray gun with a range of 50 metres, designed to solve the problem of dust production on construction sites, quarries, steelworks and cement factories.

Equipped with a dosing pump, it is a valuable ally for odour reduction in landfills, anaerobic digestion sites, compost heaps and the waste sector in general.

Automations

  • Heated aluminium sprocket with electrical resistance for sub-zero operation.
  • Integrated PLC panel with touchscreen panel
    • rotation control 0° to 340°;
    • working angle from -20° to + 45°;
    • selectable active nozzles;
    • articulated arm with up/down movement;
    • Weekly work scheduling (3 daily start/stop cycles)
  • Automatic water draining (excludable function)
  • Type of atomisation
    • high-pressure fine atomisation (for wood dust or similar)
    • thicker spray (perfect for demolition)

Conrad Cannons and Water

  • The CONRAD filtration system for incoming water is the best on the market and uses a Stainless steel filter cartridge, length 500 mm x 80 mm diameter. Inspectable triple-mesh stainless steel filter.

    This allows you to use any type of water to feed the cannon: industrial, well, VVF ring, purifier, aqueduct, rain collection...

    All CONRAD cannons are equipped with a vertical and self-priming pump for gravity feeding, therefore no inlet water pressure is required.

Optional

  • Odour suppression: electric dosing pump for mixing the odour control chemical (chemical not included)
  • ON-OFF radio remote control with 12 function keys, battery charger. Range 100 m.
  • Integrated anemometer with PLC.
  • Customised turbine colour.
  • Atex components on request according to the level required.

CONRAD C50 cannon configurations

CONRAD C50 equipped on a galvanised pole, fed by a high-pressure pump.

CONRAD C50 on an articulated arm installed on an autonomous dust suppression system.

CONRAD C50 on articulated boom: achievable working height up to 550 cm

Conrad C50 Stories

en_GB

Request a quote