Industry 4.0 and CANNON-CONRAD you can!
17 March 2021
Industry 4.0 is perhaps the second most used word after 'virus' between 2020 and 2021! It can be said that the Industry 4.0 Plan
Autonomous, all-in-one dust-abatement station, set up on a pivoting skid housing a spray gun, water tank and diesel generator.
The system has been customised with numerous other accessories including radio control, mixing pump for odour-abatement product, industry 4.0 kit ...
Suitable for dust and odour management from composting and non-hazardous waste management
Station complete with:
All set up on a single pivoting base to have everything you need at hand.
The Conrad dust-laying station set up on a walk-behind base is a stand-alone solution for professional dust control with customised fittings and designed together with the customer.
The forklift version is suitable in contexts where the point of origin and of dust or odours is known and concentrated, such as stationary machinery and defined material storage areas.
It is easy to guess why a customer requires an autonomous dust suppression station rather than a simple spray gun. In many contexts, in fact, access to the water mains is difficult, and the same can be said for electricity, for example in large quarries or terraced landfills or simply waste dumps that can cover large areas.
Here, in these now very frequent situations, the company needs integrated, all-in-one solutions: water + energy + spray gun.
On these stations we applied the CONRAD C32 spray gun equipped with a PLC new generation that allows you to manage countless automatisms such as:
our articulated boom spray gun set-up is among the best equipped in the industry, it has a reach that allows the turbine to reach a height of approximately 5.5m. At the top, the slewing ring controls the rotation to orient the spray precisely and the tilt motor allows the spray to be tilted from -10° to + 45°.
The planned equipment of the sprayer on an articulated arm/pantograph allows the gun to rise above machinery such as screeners, shredders, conveyor belts and discharge hoppers that generate dust and odour, acting from the top down and even more easily cutting down the emissions that are to be controlled and reduced.
| Technical Data | model CONRAD C32 |
|---|---|
| ELECTRICAL CONNECTION | CEE plug 32A 5P |
| TOTAL INSTALLED POWER | 8 Kw |
| GITTATA | over 30 m |
| N. UGELLI | 64 (32+32) |
| CROWNS | 2 aluminium crowns | heated with electrical resistance for sub-zero operation. |
| AUTOMATISMS | PLC Functions: ON/OFF Fan | ON/OFF Pump| Rotation: 340° automatic | Tilt: -20% +45% automatic | Lifting and lowering of articulated arm | max. height 5.5 m | Selectable active nozzles | Work cycle programming |
| ROTATION | 340° automatic with servo motor |
| INCLINATION | -20° +45° automatic |
| FAN POWER | 3 Kw - 400V - 50Hz |
| ASCENT/DESCENT | only with articulated boom set-up | achievable working height 5.5 m |
| Ø FAN | 410 mm - 3000 rpm |
| PRESSURE | 10 - 15 bar |
| WATER CONSUMPTION | 33 l/min |
| IP | 65 |
| COVERED AREA | 2800 m² |
| NOISE | 70 dB |
| INTEGRATED FILTER | 100 µm |
| WATER PUMP INCLUDED | Self-priming vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required. |
| WATER ALLOCATION | 1 1/2″ - CAMLOCK |
Industry 4.0 is perhaps the second most used word after 'virus' between 2020 and 2021! It can be said that the Industry 4.0 Plan
https://youtu.be/HD0LgSxgabc Demolition is a profession, and in Italy alone there are an estimated 7 million abandoned buildings potentially subject to demolition action. In the previous article
Our line of spray cannons is designed to cover all needs at the most difficult sites:
QUARRIES - MINES - CONSTRUCTION SITES - DEMOLITION - AGGREGATES FROM CEMENT AND STEEL WORKS - RECYCLING - WASTE DUMPS - ODOUR ELIMINATION IN LANDFILLS - WOOD AND ALUMINIUM PROCESSING SITES - ENVIRONMENTAL REPAIRS - COOLING OF STADIUMS AND PARKS.
