Autonomous forking station with CONRAD C42 on articulated boom, tank and generator

Features

Autonomous dust-abatement station set up on customised towable skids for quarries, landfills, waste disposal, compost heaps.

 

station complete with:

CONRAD C42 CANNON  with ARTICULATED ARM

-INTEGRATED PLC FOR ALL AUTOMATISMS

-WATER TANK 3000 or 5000 LITRES (optional)

-DIESEL GENERATOR SET

-FORKABLE SKID

CUSTOMISED DUST SUPPRESSION STATION

CONRAD dust-abatement stations mounted on galvanised skids are advanced dust control systems capable of solving the problems of dusty emissions and unpleasant odours from construction sites, landfills, reclamation areas, waste dumps and composting.

The self-contained forklift dust-laying station can be easily transported thanks to forklift pockets.

PLC-CONTROLLED SPRAY GUN

The dust suppression cannons fitted on these systems are equipped with PLC of the new generation that allow you to manage countless automatisms :

  • Rotation control from 0° to 340°
  • Tilt control from -20° to + 45°.
  • Up/down movement in the articulated arm model
  • Setting the working angle Start
  • Fan Start water supply (motor pump/ solenoid valves)
  • Weekly work scheduling (3 daily start/stop cycles)
  • Active nozzle selection
  • Switching the crown heater on or off
  • Turning the lighthouse heater on or off
  • Switching the radio control heater on or off

CONRAD CANNON WITH ARTICULATED ARM

our articulated boom spray gun set-up is among the best equipped in the industry, it has a reach that allows the turbine to reach a height of approximately 5.5m. At the top, the slewing ring controls the rotation to orient the spray precisely and the tilt motor allows the spray to be tilted from -10° to + 45°.  

The planned equipment of the sprayer on an articulated arm/pantograph allows the gun to rise above machinery such as screeners, shredders, conveyor belts and discharge hoppers that generate dust and odour, acting from the top down and even more easily cutting down the emissions that are to be controlled and reduced.

TECHNICAL CHARACTERISTICS OF THE CONRAD C42 CANNON

Technical Datamodel CONRAD C42
GITTATA40 m
N. UGELLI64 (32+32)
CROWNS2 aluminium crowns - heated with electrical resistance for sub-zero operation.
AUTOMATISMSintegrated PLC electronics
ROTATION340° automatic with servo motor
INCLINATION-20° +45° automatic
FAN POWER3 Kw - 400V - 50Hz
ASCENT AND DESCENTonly on articulated boom set-up - reachable working height 5.5 m
Ø FAN410 mm - 3200 rpm
PRESSURE50 - 60 bar - integrated high pressure pump
WATER CONSUMPTION18-21 l/min
IP65
COVER AREA4700 m²
NOISE70 dB
INTEGRATED FILTERStainless steel filter cartridge length 500 mm x diameter 80 mm. Triple inspectable INOX micro-retina filter.
FILTERING CAPACITY250 µm 60 mesh
TYPE OF WATER THAT CAN BE USEDindustrial, well (pre-filtered), fire ring, water purification, rainwater collection
WATER PUMP INCLUDEDSelf-priming vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required.
HYDRAULIC CONNECTION1"1/2 gas - CAMLOCK

Autonomous Stations:

CONRAD C32 breaks down demolition dust

https://youtu.be/HD0LgSxgabc Demolition is a profession, and in Italy alone there are an estimated 7 million abandoned buildings potentially subject to demolition action. In the previous article

More from our range

Request a quote

Call us