Autonomous Station #15

The best solution for dust and odour suppression at landfills and waste recycling sites, minimising water consumption

More than 40 m of jet powered by a high-quality high-pressure pump.

Set up

CUSTOMISED DUST SUPPRESSION STATION

CONRAD dust-abatement stations mounted on galvanised skids are advanced dust control systems capable of solving the problems of dusty emissions and unpleasant odours from construction sites, landfills, reclamation areas, waste dumps and composting.

The self-contained forklift dust-laying station can be easily transported thanks to forklift pockets.

PLC-CONTROLLED SPRAY GUN

  • Rotation control from 0° to 340°
  • Tilt control from -20° to + 45°.
  • Up/down movement in the articulated arm model
  • Setting the working angle Start
  • Fan Start water supply (motor pump/ solenoid valves)
  • Weekly work scheduling (3 daily start/stop cycles)
  • Active nozzle selection
  • Switching the crown heater on or off
  • Turning the lighthouse heater on or off
  • Switching the radio control heater on or off

CONRAD CANNON WITH ARTICULATED ARM

Il nostro allestimento del cannone nebulizzatore con braccio articolato è tra i più attrezzati nel settore, ha uno sbraccio che consente alla turbina di raggiungere circa i 5,5 m di altezza. In cima la ralla gestisce la rotazione per orientare il getto in modo preciso e il motore di tilt consente di inclinare da -10° a + 45° l’inclinazione del getto.  

The planned equipment of the sprayer on an articulated arm/pantograph allows the gun to rise above machinery such as screeners, shredders, conveyor belts and discharge hoppers that generate dust and odour, acting from the top down and even more easily cutting down the emissions that are to be controlled and reduced.

Stazione in Azione:

Summary Sheet

Additional information

Range

40 m

N. Nozzles

64 - selectable 32|32

Crowns

2 aluminium crowns - heated with electrical resistance for sub-zero operation.

PLC automation

integrated PLC electronics, Headlight switch-on, Water pump switch-on, Crown heater switch-on, Fan switch-on, Pause/Work function, Rotation setting from 0° to 340°, Articulated boom up/down, Daily and weekly timer, selectable active nozzles

Rotation

340° automatic with servo motor

Inclination

-20° +45° automatic

Fan power

3 Kw-400V-50Hz

Total installed power

8 kW

Ascent / Descent

only with articulated boom set-up - reachable working height 5.5 m

Ø FAN

410 mm - 3200 rpm

Pressure

50 - 60 bar - integrated high-pressure pump

Water Consumption

18-21 l/min

IP

65

Covered Area

4700 m²

Noise

70 dB

Water Filter

Inspectable stainless steel filter

Filtering capacity

250 µM 60 mesh, 100 µm

Water connection

1 ½ " - Camlock

Water pump included

Self-priming vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required

Electrical connection

CEE 32A 3P+N+E

Available options

Industry 4.0 kit, Pressure washer lance kit with 10 m of connected high pressure hoses, Dosing pump for odour abatement, Remote control

Altre Stazioni Autonome

Request a quote