CANNONS-CONRAD

CONRAD Phoenix

Phoenix is the Dust Suppression Cannon most versatile of the innovative Conrad line. Designed to be powerful, quiet, easy to transport by hand and space-saving.

The strength of this dust cannon, apart from its size and ease of use, is of course the PRICE!

Additional information

Range

20 m

N. Nozzles

4

Rotation

360° manual

Inclination

-20° +45°manual

Pressure

50-60 bar

Water Consumption

8 l/min

Fan power

2 kW - 220 V

Noise

70 dB

IP

55

Covered Area

1.250 m²

Ø FAN

410 mm

Water Filter

integrated and inspectable with 100 µm filtration degree

Type of water that can be used

industrial, well (pre-filtered), fire ring, water purification, rainwater harvesting.

Water pump included

Self-priming vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required

Water connection

¾"male

Electrical connection

Electric cable with a minimum cross-section of 3×2.5 mm and a single-phase 3-pin blue 16A plug.

Estremamente semplice da usare: 

2 tasti soltanto, tasto ON/OFF Pompa e tasto ON/OFF Ventola

How to connect Phoenix to power:

La macchina ha una potenza installata di 3 kW totali, si consiglia dunque l’utilizzo di un electrical cable con sezione minima di 3×2,5 mm e spina monofase 3 poli blu 16A.

Come allacciare Phoenix all’acqua:

¾”maschio e non necessita di pressione in entrata, quindi si può collegare senza problemi anche a un serbatoio.

Previous
Next

ON INTEGRATED GENSET 10 KVA

Previous
Next

SU PALO DA 4 METRI CON RALLA MANUALE

Previous
Next

CON POMPA SEPARATA PER APPLICAZIONI IN QUOTA

ph20 with dosatron2 Small

Dosing pump for odour control, ideal in

  • landfills
  • composting sites
  • waste recovery
  • anaerobic digestion sites
  • disposal of sewage sludge
lance

Pressure washer lance with 10-metre hose, ideal for:

  • cleaning vehicles in landfills and quarries
  • cleaning and sanitisation in urban areas
  • sweeping soil

Phoenix Stories

IMG20211028155951

Ecomondo 2021 -Green Technology Expo

From 26 to 29 October, four intense days in which we were in contact with customers from all over Italy who came to the Rimini Expo Centre in search of the most suitable solution to control dust and odour in their work area.

Request a quote