Conrad LC30
Ideal for hire, fully manual and easy to use, 30 m range, perfect for demolition on construction sites. Placed on a stainless steel stand, the CONRAD LC30 is equipped with a very simple control unit, suitable for inexperienced operators.
Dimensions80 x 120 x 220 cm - Weight260 kg
Additional information
| Range | 20-30 m |
|---|---|
| N. Nozzles | 30 |
| Crowns | 1 |
| Rotation | 360° manual |
| Inclination | -20° +45°manual |
| Pressure | 10-15 bar |
| Water Consumption | 33 l/min |
| Fan power | 3 Kw-400V-50Hz |
| Ø FAN | 410 mm |
| Noise | 70 dB |
| IP | 55 |
| Covered Area | 2800 m² |
| Water Filter | Inspectable filter with a filtration capacity of 100-150 µm |
| Type of water that can be used | industrial, well (pre-filtered), fire ring, water purification, rainwater harvesting. |
| Water pump included | Self-priming vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required |
| Water connection | 1 ½ " - Camlock |
| Electrical connection | electrical cable with minimum cross-section 5×2.5 mm and 5-pin 3-phase plug 32A |
CONRAD LC30 dust cannons on trolley are used for the construction of the Pedemontana Veneta tunnel - Vicenza - Italy
RECOMMENDED FOR:
- demolitions
- rental fleet
- dust control on fixed material unloading stations
EASY AND MANUAL:
- 30 nozzles on one crown
- 30 metres range
- Manual rotation and tilt adjustment
- Set up on a pivoting tower
- Easy to use: Fan ON/OFF - Pump ON/OFF
