CANNONS-CONRAD

Conrad LC30R

NEW! The CONRAD LC30-R is made for the demolition sector.
LC30-R has integrated PLC for automatic and adjustable rotation control.

Additional information

Range

30 m

N. Nozzles

30

Rotation

340° automatic with integrated PLC

Automatisms

PLC functions: ON/OFF Fan - ON/OFF Pump - Programmable rotation

Inclination

-20° +45°manual

Pressure

10-15 bar

Water Consumption

33 l/min

Fan power

3 Kw-400V-50Hz

Noise

70 dB

IP

55

Covered Area

2800 m²

Ø FAN

410 mm

Water Filter

Inspectable filter with a filtration capacity of 100-150 µm

Type of water that can be used

industrial, well (pre-filtered), fire ring, water purification, rainwater harvesting.

Water connection

1 ½ " - Camlock

Water pump included

Self-priming vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required

Electrical connection

electrical cable with minimum cross-section 5×2.5 mm and 5-pin 3-phase plug 32A

lc303 MARK 600X600
IMG20200612084554 Medium
lc30 tower
IMG20200612084732 Medium
  • 30 nozzles
  • 30 metres range
  • AUTOMATIC ROTATION of 340° with integrated PLC
  • PLC: Fan ON/OFF - Pump ON/OFF - Programmable rotation
  • On galvanised pivoting tower
  • Washable water filter
  • Set-ups available: on a trolley base, on a trolley, on autonomous stations.

The Conrad LC30R is designed to be easily installed on a trolley to accommodate the power unit.

  • easy to use
  • easy to move
  • autonomous
  • falls within the contributions Industry 4.0
LC30 R MARK

THE CART

The Conrad LC30R dust suppression gun can also be set up on a trolley excellent performance for the construction site and quarry.

First of all, it consists of a sturdy galvanised base with 3 pneumatic wheels, 2 stabilisers and a front rudder that make towing very easy, even by hand results extremely manageable.

IMG20201019084200 Small

THE PLC

The Conrad LC30R water atomiser is equipped with an electronic PLC touch screen easy to use for any operator.

The use of the PLC is essential to precisely set the rotation from 0° to 340° of the cannon in order to make the most of the spray range and act more precisely on the areas to be treated.

And with the INDUSTRY 4.0 KIT of CANNONI-CONRAD the dust suppression cannon will receive the 40% contribution in the form of a tax credit.

The Conrad LC30R sprayer in action:

LC30R Low plant jaw

Dust control with Conrad LC30R

CONRAD LC30R Demolition dust, vehicle pass-by dust, concrete plant dust ... these are some of the tasks for which our sprayers have been

Request a quote