
Woodworking with CONRAD C62 - Urbania
This CONRAD C62 water atomiser is equipped with a 12-metre high clamp support to neutralise wood dust in the loading area - Urbania - Italy
The C62 spray gun is capable of suppressing dust and odours in all kinds of hostile environments without difficulty. The C62 offers the possibility of selecting the number of active nozzles, depending on the type of spray intensity desired.
Range | 60 m |
---|---|
N. Nozzles | 60, self-cleaning Monarch model (can be excluded in groups of 20+20) |
Crowns | 1 aluminium crown - heated with electrical resistance for sub-zero operation. |
Automatisms | integrated PLC electronics |
Rotation | 340° automatic with servo motor |
Inclination | -20° +45° automatic |
Ascent / Descent | only with articulated boom set-up - reachable working height 5.5 m |
Water Consumption | 60 l/min |
Fan power | 11 kW - 400V - 50Hz |
Ø FAN | 660 mm |
IP | 55 |
Pressure | 10-15 bar |
Covered Area | 10.700 m² |
Noise | 70 dB |
Water Filter | Stainless steel filter cartridge length 500 mm x diameter 80 mm. Triple inspectable INOX micro-retina filter. |
Filtering capacity | 250 µM 60 mesh |
Type of water that can be used | industrial, well (pre-filtered), fire ring, water purification, rainwater harvesting. |
Water connection | 1 1/2″ gas - CAMLOCK |
Water pump included | Self-priming vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required |
CONRAD C62 pulveriser mounted on galvanised pole with motorised slewing ring with PLC programmable setting, suitable for dust-abatement work at fixed and/or long-term locations.
In this version, the cannon can also be separated so that it can be placed on pre-existing plinths, on barriers or clamped with clamps on walls. The control unit will be set up in an area accessible to the control personnel.
Dimensions150 x 120 x 220 cm
Weight: 450 kg
The CONRAD C62 wheeled dust suppression system is suitable for situations where the place of origin of dust is variable, for example in demolition work, quarries, tunnels. Wheel-mounted sprayers are among the most popular in rental fleets. Cannons Conrad has two models available with 2 or 3 pneumatic wheels, and in both cases there are always pockets for lifting with a forklift.
Compact trolley dimensions: 155 x 210 x 240 cm - kg 620
Wide trolley dimensions: 325 x 210 x 240 cm - kg 620
The CONRAD C62 spray gun is also mounted on an articulated arm and is capable of reaching up to 5.5 metres in height so that it is in a favourable position in relation to the point of origin of the dust, hitting it from above and causing it to fall quickly.
Dimensions: 120 x 260 x 212 cm - 700 kg
This CONRAD C62 water atomiser is equipped with a 12-metre high clamp support to neutralise wood dust in the loading area - Urbania - Italy
CONRAD C62 Spray Cannon on galvanised pole is used to reduce dust and odours from waste management - Ferrara - Italy
The CONRAD C62 dust suppressor on a trolley to eliminate dust in the landfill of unsorted waste - Prato - Italy
CANNONI-CONRAD promotes a new freestanding system: water spray cannon with articulated arm mounted on an intelligent wheeled base. CANNONI CONRAD, the Italian brand
The CONRAD filtration system for incoming water is the best on the market and uses a Stainless steel filter cartridge, length 500 mm x 80 mm diameter. Inspectable triple-mesh stainless steel filter.
This allows you to use any type of water to feed the cannon: industrial, well, VVF ring, purifier, aqueduct, rain collection...
All CONRAD cannons are equipped with a vertical and self-priming pump for gravity feeding, therefore no inlet water pressure is required.
Our line of spray cannons is designed to cover all needs at the most difficult sites:
QUARRIES - MINES - CONSTRUCTION SITES - DEMOLITION - AGGREGATES FROM CEMENT AND STEEL WORKS - RECYCLING - WASTE DUMPS - ODOUR ELIMINATION IN LANDFILLS - WOOD AND ALUMINIUM PROCESSING SITES - ENVIRONMENTAL REPAIRS - COOLING OF STADIUMS AND PARKS.