Conrad C62

The Conrad C62 spray gun can suppress dust and odours in all kinds of hostile environments without difficulty.

The Conrad C62 dust collector offers the possibility of selecting the number of active nozzles, depending on the type of spray intensity desired.

Download Brochure

Performance

Nebulizer cannon performance table

Additional information

Range

60 m

N. Nozzles

60 - selectable in groups of 20|20

Crowns

1 aluminium crown - heated with electrical resistance for sub-zero operation.

PLC automation

integrated PLC electronics, Headlight switch-on, Water pump switch-on, Crown heater switch-on, Fan switch-on, Pause/Work function, Rotation setting from 0° to 340°, Articulated boom up/down, Daily and weekly timer, selectable active nozzles

Rotation

340° automatic with servo motor

Inclination

-20° +45° automatic

Ascent / Descent

only with articulated boom set-up - reachable working height 5.5 m

Water Consumption

60 l/min

Fan power

11 kW - 400V - 50Hz

Ø FAN

660 mm

Total installed power

15 kW

IP

65

Pressure

10-15 bar, 50-60 bar

Covered Area

10.700 m²

Noise

70 dB

Water Filter

Inspectable stainless steel filter

Filtering capacity

100 µm

Water connection

1 ½ " - Camlock

Water pump included

Self-priming vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required

Lifting

Housing for forklift forks

Available options

Industry 4.0 kit, Dosing pump for odour abatement, Remote control

Electrical connection

CEE 32A 3P+N+E

Applications of CONRAD C62

ON GALVANISED POLE

CONRAD C62 pulveriser mounted on galvanised pole with motorised slewing ring with PLC programmable setting, suitable for dust-abatement work at fixed and/or long-term locations. 

In this version, the cannon can also be separated so that it can be placed on pre-existing plinths, on barriers or clamped with clamps on walls. The control unit will be set up in an area accessible to the control personnel.

Dimensions150 x 120 x 220 cm

Weight: 450 kg

ON CART

The CONRAD C62 wheeled dust suppression system is suitable for situations where the place of origin of dust is variable, for example in demolition work, quarries, tunnels. Wheel-mounted sprayers are among the most popular in rental fleets. Cannons Conrad has two models available with 2 or 3 pneumatic wheels, and in both cases there are always pockets for lifting with a forklift.

Compact trolley dimensions: 155 x 210 x 240 cm - kg 620

Wide trolley dimensions: 325 x 210 x 240 cm - kg 620

ON ARTICULATED ARM

The CONRAD C62 spray gun is also mounted on an articulated arm and is capable of reaching up to 5.5 metres in height so that it is in a favourable position in relation to the point of origin of the dust, hitting it from above and causing it to fall quickly.

Dimensions: 120 x 260 x 212 cm - 700 kg

Automations

  • Heated aluminium sprocket with electrical resistance for sub-zero operation.
  • Integrated PLC panel with touchscreen panel
    • rotation control 0° to 340°;
    • working angle from -20° to + 45°;
    • selectable active nozzles;
    • articulated arm with up/down movement;
    • Weekly work scheduling (3 daily start/stop cycles)
  • Automatic water draining (excludable function)
  • Type of atomisation
    • high-pressure fine atomisation (for wood dust or similar)
    • thicker spray (perfect for demolition)

Conrad Cannons and Water

  • The CONRAD filtration system for incoming water is the best on the market and uses a Stainless steel filter cartridge, length 500 mm x 80 mm diameter. Inspectable triple-mesh stainless steel filter.

    This allows you to use any type of water to feed the cannon: industrial, well, VVF ring, purifier, aqueduct, rain collection...

    All CONRAD cannons are equipped with a vertical and self-priming pump for gravity feeding, therefore no inlet water pressure is required.

Optional

  • Odour suppression: electric dosing pump for mixing the odour control chemical (chemical not included)
  • ON-OFF radio remote control with 12 function keys, battery charger. Range 100 m.
  • Integrated anemometer with PLC.
  • Customised turbine colour.
  • Atex components on request according to the level required.

Conrad C62 Stories

More from our range

Request a quote

Call us