Conrad C42

The best solution for dust and odour suppression at landfills and waste recycling sites, minimising water consumption

More than 40 m of jet powered by a high-quality high-pressure pump.

 

Download Brochure

Performance

Nebulizer cannon performance table

Additional information

Range

40 m

N. Nozzles

64 - selectable 32|32

Crowns

2 aluminium crowns - heated with electrical resistance for sub-zero operation.

PLC automation

integrated PLC electronics, Headlight switch-on, Water pump switch-on, Crown heater switch-on, Fan switch-on, Pause/Work function, Rotation setting from 0° to 340°, Articulated boom up/down, Daily and weekly timer, selectable active nozzles

Rotation

340° automatic with servo motor

Inclination

-20° +45° automatic

Fan power

3 Kw-400V-50Hz

Total installed power

8 kW

Ascent / Descent

only with articulated boom set-up - reachable working height 5.5 m

Ø FAN

410 mm - 3200 rpm

Pressure

50 - 60 bar - integrated high-pressure pump

Water Consumption

18-21 l/min

IP

65

Covered Area

4700 m²

Noise

70 dB

Water Filter

Inspectable stainless steel filter

Filtering capacity

250 µM 60 mesh, 100 µm

Water connection

1 ½ " - Camlock

Water pump included

Self-priming vertical multistage centrifugal electric pump for gravity operation. No inlet water pressure required

Electrical connection

CEE 32A 3P+N+E

Available options

Industry 4.0 kit, Pressure washer lance kit with 10 m of connected high pressure hoses, Dosing pump for odour abatement, Remote control

Automations

  • 2 Heated aluminium crowns with electrical resistance for sub-zero operation.
  • Integrated PLC panel with touchscreen panel
    • rotation control 0° to 340°;
    • working angle from -20° to + 45°;
    • selectable active nozzles;
    • articulated arm with up/down movement;
    • Weekly work scheduling (3 daily start/stop cycles)
  • Automatic water draining (excludable function)
  • Type of atomisation
    • high-pressure fine atomisation (for wood dust or similar)
    • thicker spray (perfect for demolition)

Conrad Cannons and Water

  • The CONRAD filtration system for incoming water is the best on the market and uses a Stainless steel filter cartridge, length 500 mm x 80 mm diameter. Inspectable triple-mesh stainless steel filter.

    This allows you to use any type of water to feed the cannon: industrial, well, VVF ring, purifier, aqueduct, rain collection...

    All CONRAD cannons are equipped with a vertical and self-priming pump for gravity feeding, therefore no inlet water pressure is required.

Optional

  • Odour suppression: electric dosing pump for mixing the odour control chemical (chemical not included)
  • ON-OFF radio remote control with 12 function keys, battery charger. Range 100 m.
  • Integrated anemometer with PLC.
  • Customised turbine colour.
  • Atex components on request according to the level required.

CONRAD C42 cannon configurations

CONRAD C42 Stories

CONRAD C42 ceiling-mounted cannon

In the province of Rome, we installed the Conrad C42 cannon bikini version, i.e. divided into two pieces: TOP: the cannon installed at altitude with the

More from our range

Request a quote

Call us